DIY Art Display panels

How to Make Your Own Art Display Panels

FIRST WEDNESDAY

Materials:
3 (4) wooden, screen doors; size 37" X 80"
Black PVC Coated Welded Wire Mesh; 3' X 50'
Black Double Point Tacks; size #5
12 (18) Zinc Screw Eyes; 104 X 2-1/16
4 (6) Zinc bolts
1 Qt Varathane, Polyurethane Satin

   Optional: 3 (4) rubber door stops
                     nails

Tools:
Phillips Head Screw Driver
Hammer
Electric Drill plus 7/32 Drill Bit
Paint Brush
Tape Measure
Pencil
Pliers
Sheet Metal Hand Steel Cutter

   Optional: Plastic Drop Sheet
                     Saw Horses

---

STEP 1 - Using a Phillips head screw driver, remove all screens from doors, exposing the wooden frames. Paint frames following instructions on the can.

---

STEP 2 - Cut 2" X 3" black PVC coated welded wire to cover the entire door frame. Remove extra wires sticking out from edges.

---

STEP 3 -

---

Step 4 - Turn panel on it's side and measure 8" from top of frame. Using a 7/32 drill bit, drill a 1/2" deep hole. Screw in a 2-1/16 screw eye.

Following the above diagram, on the side of each frame, place A one screw eye 8" from top right and B one screw eye 8" from bottom left. Place two screw eyes, 2" apart, at 7" and 9" from C top left and D bottom right.

---

STEP 5 - Attach panels by securing 2.5" bolts into all three screw eyes. Use either regular picture hooks or s-hooks to hang paintings from wire mesh.